 |
 |
|
|
 |
|
|
ROUSH Propane F-250 & 350 Kit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Introduction
ROUSH Performance is pleased to announce the availability of the ROUSH Liquid Propane
Injection (LPI)
Conversion for 2009 - 2010 Ford F-250s and F-350s equipped with the 5.4L V8 engine.
The ROUSH LPI Conversion system can be ordered one of two ways: If you already own a truck that you'd like to convert,
you can order
the kit through an authorized dealer and have them install it. Or, if you want to buy a truck right from the factory
with the kit
already installed by ROUSH, we will help you find a dealer near you to place the order.
Driving an F-250 or F-350 equipped with the ROUSH LPI technology, you will immediately notice there is no loss in
horsepower,
torque, or towing capacity, as was the case with many propane conversions of the past. Older kits used to rely on
vapor injection,
but because the ROUSH technology leaves propane in the liquid state until injection, it's 30% more powerful than the
older
technology.
The F-250 / F-350 LPI Conversion also gives you the ability to save money on operating costs while being more
environmentally
conscious about your vehicle's emissions. Propane is much more environmentally friendly as compared to gasoline**, and
reduces
harmful emissions by significant amounts:
- 18% less Greenhouse Gasses*
- 20% less Nitrous Oxide
- 60% less Carbon Monoxide
- Fewer particulate emissions
And, because over 97% of the United States' propane supplies comes from refining and production done in North America,
it helps to
reduce our country's dependence on foreign oil. With over 12,500 public and private fueling stations open today, it's
got a large
and stable infrastructure in place that makes it cheaper and more readily available than E85.
|
|
|
|
High Capacity In-Bed Tank:
- Price: $9,995 MSRP
- Mounts in the bed for extra driving range
- Approximately 450 mile range
- Holds 53 useable gallons
- Measurements:
- Diameter: 20 inches
- Height: 21 inches
- Length: 63 inches
- Parts:
- Fuel Lines
- Fuel Rail Assembly
- Propane Fuel Injectors
- In-Bed Fuel Tank
- Re-calibrated computer
Under-Bed Tank:
- Details and Pricing Coming Soon!
Kit Fitment Requirements:
- Fits 2009 and 2010 Ford F-250s and F-350s equipped with the 5.4L 3V V8 Engine
- Will not work on trucks with a GVWR greater than 14,000 lbs
Ordering Information:
>
Click here to learn how to order
* The greenhouse gas (GHG) calculations mentioned here were developed in a study commissioned by
the Propane Education & Research Council (PERC) and conducted by Energetics Incorporated.
Using the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET) model
recognized by the U.S. Department of Energy, the study reviewed the full lifecycle accounting
(on-site and upstream) of GHG emissions resulting from the use of propane and other fuels in
various market sectors.
** Comparisons of nitrous oxide and carbon monoxide emissions are taken from studies conducted
by the World LP Gas Association and the California Energy Commission in January 2003. Data on
particulate emissions comes from studies by the Southwest Research Institute.
Have a question about ROUSH Propane? Call us at 800-59-ROUSH or
send us an email.
|
|
|
|
 |
|
|
|
 |
|
|
 |
|
 |
|
Contact Us |
|
|
|
|
|
|
|
|
Have a question or want to buy a ROUSH Propane Kit?
Call us at
800-59-ROUSH
Or send us an
Email |
|
|
 |
|
|
|
