Product highlights for the 5.0L Ford Aluminator Engine - ROUSH Phase 1 to Phase 3 Supercharger Kit:
- For use ONLY on the NATURALLY ASPIRATED 11.0:1 Compression Ratio Ford Racing 5.0L Aluminator Crate Engine -- manual transmissions. Please contact our sales team if you are unsure what type of engine you have.
- ROUSH Fuel Pump Voltage Regulator to moderate fuel flow and ensure a proper fuel-to-air charge ratio
- ROUSH Plug-n-Play wiring harness where no modifications are needed to the vehicles fuel pump wiring system
- ROUSH Cold Air Induction System with 110mm MAF, washable/re-usable open element air filter and air dam
- Bolt on 80mm Supercharger Pulley
- To be downloaded using the ROUSH Diagnostic Tool (RDT) software
- Produces 675 horsepower and 585lb-ft of torque (100 HP gain and 80 lb-ft gain over Phase 1)
- 3 Year/36,000 Mile Parts limited warranty included (ROUSH Supplied Parts Only)
- NOT approved for sale or installation in the state of California
Pump up the power of your Naturally Aspirated 11.0:1 Ford Racing 5.0L DOHC Aluminator Crate engine with the ROUSH Phase 3 Supercharger Upgrade kit. This upgrade kit is specifically designed for those who have the ROUSH Phase 1 supercharger installed on the 5.0L Aluminator NA 11.0:1 Compression Ratio Crate engine on their 2011-2014 Mustang GT.
The ROUSH Performance Phase 1-to-Phase 3 "Aluminator" Edition Upgrade kit improves the power gains of your 5.0L Phase 1 ROUSHcharger to 675 HP and 585 ft-lbs of concrete-smashing torque. That’s an increase of 100 HP and 80 lb-ft of torque -- more power to dominate the streets!
This upgrade kit offers better performance and added protection to meet the high demands of this much horsepower. To meet the increased fuel demands the ROUSH Fuel Pump Voltage Regulator and Plug-n-Play wiring harness offers are added to help regulate fuel pressure. The ROUSH Plug-n-Play wiring harness allows for easy installation or removal if the kit ever needs to be removed. No cutting or splicing of factory wiring and harnesses required.
The primary components of the Phase 1-to-Phase 3 "Aluminator" Edition Upgrade kit include:
- 80mm Supercharger Pulley
- ROUSH Fuel Pump Voltage Regulator with ROUSH Plug-n-Play wiring harness
- Cold air induction system
- 2085mm 6-rib serpentine belt
- To be downloaded using the ROUSH Diagnostice Tool (RDT) software
This part now utilizes the ROUSH Flash Voucher card to be calibrated using ROUSH Diagnostic Tool (RDT) software and pass-thru device. If you do not have access to an approved pass-thru device, you can send your PCM back to ROUSH to be flashed for an additional $100.00 fee.Please contact Customer Care at 800-59-ROUSH if you have any questions.
This kit is protected by ROUSH Parts limited warranty (ROUSH Supplied Parts Only), which is for 3 years or 36,000 miles from original installation date.
The 5.0 Aluminator NA was designed specifically for high performance applications -- now is the time to add the power!